Front Suspension, Strut and Cradle for 2019 Dodge Charger
Mopar M14x2.00x120.00. If a different Bolt Length is needed, use Item #11. Lower Control Arm to Knuckle. Spring link to knuckle. Front Lower Control Arm to Cradle.
Mopar Suspension Shock Absorber, Right
SUSPENSION
Mopar Front Suspension Spring Isolator, Lower
FRONT SUSPENSION SPRING
Mopar M14x2.00x100.00. LCA to Axle. Cast. Lower Control Arm to Body. LCA to Body-From 11-30-05-[M14X2.00X110.00]. Stamped Shock Clevis to LCA. Shock Clevis to Lower Control Arm. When Switching to New Stamped Clevis, Must Use a New Bolt.
Mopar M14x2. Spring Link to Knuckle. Lower Control Arm to Cradle. Shock/Stabilizer Link Attaching. Clevis to Lower Control Arm. Lower Control Arm Pivot Bolt. Camber Adjustment Nut. Tension Strut to Knuckle. Front Tension Strut to Cradle.
Mopar M12x1.75. Stabilizer Bar To Cradle. Upper Control Arm to Knuckle. Shock Upper. Toe Link to Frame. Frt susp knuckle to uca. Shock Rod to Mount.
Mopar With Sales Code ABD bushings are not serviced separately.
Mopar M14x1.50. Outer Tie Rod to Knuckle. Frt susp knuckle to lca. Knuckle attaching. Front Ball Joint Attaching. Lower Control Arm to Ball Joint on Knuckle.
Mopar M14x2.00x125.00. M14x2.00x80.00. Lower Control Arm to Cradle. Tension Strut to Cradle.
Mopar Front Suspension Spring Isolator, Lower
FRONT SUSPENSION SPRING
Mopar M12x1.75x89.50. Shock to LCA. Shock to Spring Link. M12x1.75x82.00. Uca. Clevis Pinch Attaching. Upper Control Arm. Shock Mounting. Shock to Lower Control Arm.
Mopar M14x2. Spring Link to Knuckle. Lower Control Arm to Cradle. Shock/Stabilizer Link Attaching. Clevis to Lower Control Arm. Lower Control Arm Pivot Bolt. Camber Adjustment Nut. Tension Strut to Knuckle. Front Tension Strut to Cradle.
Mopar M12x1.75. Bracket to Body. Bracket To Transmission Mount. Rear, Rack and Pinion to Cradle. Sway Bar Link to Sway Bar. Rear Seat To Floor. Rear EPS Gear to Cradle. Clevis Pinch Attaching. Blocker to Tran Mount Nut Front.
Mopar M10x1.50x45.00. Bearing and Shield to Knuckle. Bearing to Knuckle at Shield. Dust Shield to Knuckle. Dust Shield, Bearing Attaching. Hub to Knuckle Mounting. Hub & bearing assy to knuckle. Guide. Knuckle to Hub and Bearing.
Mopar M14x1.50. Outer Tie Rod to Knuckle. Frt susp knuckle to lca. Knuckle attaching. Front Ball Joint Attaching. Lower Control Arm to Ball Joint on Knuckle.
Mopar M12x1.75. Stabilizer Bar To Cradle. Upper Control Arm to Knuckle. Shock Upper. Toe Link to Frame. Frt susp knuckle to uca. Shock Rod to Mount.